Some computers are intentionally disconnected from the rest of the world. This includes having their internet, wireless, bluetooth, USB, external file storage and audio capabilities removed. This is called "air gapping". Even in such a situation, this program can transmit radio.
Publicly available documents already discuss exfiltration from secured systems using various electromagnetic radiations. This is documented in the TEMPEST guidelines published by the US National Security Agency and the US Department of Defense. This project simply adds to that discussion.
You should hear the "Mary Had a Little Lamb" tune playing repeatedly. Other equipment and tuning may work as well. On the equipment above, the author has achieved clear transmission over two meters of open air or one meter through drywall. Different results will be achievable with different equipment.
Are you using an antenna? At the beginning, I placed the antenna directly on top of the number 4 key and that worked best (on any AM frequency). It was a round antenna. Then once I knew it works I moved the antenna back. Moving it back reduced the number of frequencies that it worked on, and eventually only that one (1580 kHz) worked. Different hardware will certainly have different frequency response. Here are some results that have been sent in by readers. Please mail github.com@phor.net with your results (including make and model of all equipment involved) or [edit this file directly](https://github.com/fulldecent/system-bus-radio/edit/master/TEST-DATA.tsv) and create a pull request.
This program runs instructions on the computer that cause electromagnetic radiation. The emissions are of a broad frequency range. To be accepted by the radio, those frequencies must:
* Be emitted by the computer processor and other subsystems
* Escape the computer shielding
* Pass through the air or other obstructions
* Be accepted by the antenna
* Be selected by the receiver
By trial and error, the above frequency was found to be ideal for that equipment. If somebody would like to send me a SDR that is capable of receiving 100 kHz and up then I could test other frequencies.
The actual emissions are caused by the `_mm_stream_si128` instruction that writes through to a memory address. Inspiration for using this instruction was provided in:
> Guri, M., Kachlon, A., Hasson, O., Kedma, G., Mirsky, Y. and Elovici, Y., 2015. GSMem: data exfiltration from air-gapped computers over GSM frequencies. In 24th USENIX Security Symposium (USENIX Security 15) (pp. 849-864).
Please note that replacing `_mm_stream_si128` with a simple `x++;` will work too. My experience has been that `_mm_stream_si128` produces a stronger signal. There may be other ideas that work even better, and it would be nice to improve this to be more portable (not require SSE extensions).
