tgseclib/phpseclib/Crypt/Rijndael.php

<?php
/* vim: set expandtab tabstop=4 shiftwidth=4 softtabstop=4: */

/**
 * Pure-PHP implementation of Rijndael.
 *
 * Does not use mcrypt, even when available, for reasons that are explained below.
 *
 * PHP versions 4 and 5
 *
 * If {@link Crypt_Rijndael::setBlockLength() setBlockLength()} isn't called, it'll be assumed to be 128 bits.  If 
 * {@link Crypt_Rijndael::setKeyLength() setKeyLength()} isn't called, it'll be calculated from 
 * {@link Crypt_Rijndael::setKey() setKey()}.  ie. if the key is 128-bits, the key length will be 128-bits.  If it's 
 * 136-bits it'll be null-padded to 160-bits and 160 bits will be the key length until 
 * {@link Crypt_Rijndael::setKey() setKey()} is called, again, at which point, it'll be recalculated.
 *
 * Not all Rijndael implementations may support 160-bits or 224-bits as the block length / key length.  mcrypt, for example,
 * does not.  AES, itself, only supports block lengths of 128 and key lengths of 128, 192, and 256.
 * {@link http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=10 Rijndael-ammended.pdf#page=10} defines the
 * algorithm for block lengths of 192 and 256 but not for block lengths / key lengths of 160 and 224.  Indeed, 160 and 224
 * are first defined as valid key / block lengths in 
 * {@link http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=44 Rijndael-ammended.pdf#page=44}: 
 * Extensions: Other block and Cipher Key lengths.
 *
 * {@internal The variable names are the same as those in 
 * {@link http://www.csrc.nist.gov/publications/fips/fips197/fips-197.pdf#page=10 fips-197.pdf#page=10}.}}
 *
 * Here's a short example of how to use this library:
 * <code>
 * <?php
 *    include('Crypt/Rijndael.php');
 *
 *    $rijndael = new Crypt_Rijndael();
 *
 *    $rijndael->setKey('abcdefghijklmnop');
 *
 *    $size = 10 * 1024;
 *    $plaintext = '';
 *    for ($i = 0; $i < $size; $i++) {
 *        $plaintext.= 'a';
 *    }
 *
 *    echo $rijndael->decrypt($rijndael->encrypt($plaintext));
 * ?>
 * </code>
 *
 * LICENSE: Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 * 
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 * @category   Crypt
 * @package    Crypt_Rijndael
 * @author     Jim Wigginton <terrafrost@php.net>
 * @copyright  MMVIII Jim Wigginton
 * @license    http://www.opensource.org/licenses/mit-license.html  MIT License
 * @version    $Id: Rijndael.php,v 1.12 2010/02/09 06:10:26 terrafrost Exp $
 * @link       http://phpseclib.sourceforge.net
 */

/**#@+
 * @access public
 * @see Crypt_Rijndael::encrypt()
 * @see Crypt_Rijndael::decrypt()
 */
/**
 * Encrypt / decrypt using the Counter mode.
 *
 * Set to -1 since that's what Crypt/Random.php uses to index the CTR mode.
 *
 * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Counter_.28CTR.29
 */
define('CRYPT_RIJNDAEL_MODE_CTR', -1);
/**
 * Encrypt / decrypt using the Electronic Code Book mode.
 *
 * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Electronic_codebook_.28ECB.29
 */
define('CRYPT_RIJNDAEL_MODE_ECB', 1);
/**
 * Encrypt / decrypt using the Code Book Chaining mode.
 *
 * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher-block_chaining_.28CBC.29
 */
define('CRYPT_RIJNDAEL_MODE_CBC', 2);
/**
 * Encrypt / decrypt using the Cipher Feedback mode.
 *
 * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher_feedback_.28CFB.29
 */
define('CRYPT_RIJNDAEL_MODE_CFB', 3);
/**
 * Encrypt / decrypt using the Cipher Feedback mode.
 *
 * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Output_feedback_.28OFB.29
 */
define('CRYPT_RIJNDAEL_MODE_OFB', 4);
/**#@-*/

/**#@+
 * @access private
 * @see Crypt_Rijndael::Crypt_Rijndael()
 */
/**
 * Toggles the internal implementation
 */
define('CRYPT_RIJNDAEL_MODE_INTERNAL', 1);
/**
 * Toggles the mcrypt implementation
 */
define('CRYPT_RIJNDAEL_MODE_MCRYPT', 2);
/**#@-*/

/**
 * Pure-PHP implementation of Rijndael.
 *
 * @author  Jim Wigginton <terrafrost@php.net>
 * @version 0.1.0
 * @access  public
 * @package Crypt_Rijndael
 */
class Crypt_Rijndael {
    /**
     * The Encryption Mode
     *
     * @see Crypt_Rijndael::Crypt_Rijndael()
     * @var Integer
     * @access private
     */
    var $mode;

    /**
     * The Key
     *
     * @see Crypt_Rijndael::setKey()
     * @var String
     * @access private
     */
    var $key = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";

    /**
     * The Initialization Vector
     *
     * @see Crypt_Rijndael::setIV()
     * @var String
     * @access private
     */
    var $iv = '';

    /**
     * A "sliding" Initialization Vector
     *
     * @see Crypt_Rijndael::enableContinuousBuffer()
     * @var String
     * @access private
     */
    var $encryptIV = '';

    /**
     * A "sliding" Initialization Vector
     *
     * @see Crypt_Rijndael::enableContinuousBuffer()
     * @var String
     * @access private
     */
    var $decryptIV = '';

    /**
     * Continuous Buffer status
     *
     * @see Crypt_Rijndael::enableContinuousBuffer()
     * @var Boolean
     * @access private
     */
    var $continuousBuffer = false;

    /**
     * Padding status
     *
     * @see Crypt_Rijndael::enablePadding()
     * @var Boolean
     * @access private
     */
    var $padding = true;

    /**
     * Does the key schedule need to be (re)calculated?
     *
     * @see setKey()
     * @see setBlockLength()
     * @see setKeyLength()
     * @var Boolean
     * @access private
     */
    var $changed = true;

    /**
     * Has the key length explicitly been set or should it be derived from the key, itself?
     *
     * @see setKeyLength()
     * @var Boolean
     * @access private
     */
    var $explicit_key_length = false;

    /**
     * The Key Schedule
     *
     * @see _setup()
     * @var Array
     * @access private
     */
    var $w;

    /**
     * The Inverse Key Schedule
     *
     * @see _setup()
     * @var Array
     * @access private
     */
    var $dw;

    /**
     * The Block Length
     *
     * @see setBlockLength()
     * @var Integer
     * @access private
     * @internal The max value is 32, the min value is 16.  All valid values are multiples of 4.  Exists in conjunction with
     *     $Nb because we need this value and not $Nb to pad strings appropriately.  
     */
    var $block_size = 16;

    /**
     * The Block Length divided by 32
     *
     * @see setBlockLength()
     * @var Integer
     * @access private
     * @internal The max value is 256 / 32 = 8, the min value is 128 / 32 = 4.  Exists in conjunction with $block_size 
     *    because the encryption / decryption / key schedule creation requires this number and not $block_size.  We could 
     *    derive this from $block_size or vice versa, but that'd mean we'd have to do multiple shift operations, so in lieu
     *    of that, we'll just precompute it once.
     *
     */
    var $Nb = 4;

    /**
     * The Key Length
     *
     * @see setKeyLength()
     * @var Integer
     * @access private
     * @internal The max value is 256 / 8 = 32, the min value is 128 / 8 = 16.  Exists in conjunction with $key_size
     *    because the encryption / decryption / key schedule creation requires this number and not $key_size.  We could 
     *    derive this from $key_size or vice versa, but that'd mean we'd have to do multiple shift operations, so in lieu
     *    of that, we'll just precompute it once.
     */
    var $key_size = 16;

    /**
     * The Key Length divided by 32
     *
     * @see setKeyLength()
     * @var Integer
     * @access private
     * @internal The max value is 256 / 32 = 8, the min value is 128 / 32 = 4
     */
    var $Nk = 4;

    /**
     * The Number of Rounds
     *
     * @var Integer
     * @access private
     * @internal The max value is 14, the min value is 10.
     */
    var $Nr;

    /**
     * Shift offsets
     *
     * @var Array
     * @access private
     */
    var $c;

    /**
     * Precomputed mixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $t0;

    /**
     * Precomputed mixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $t1;

    /**
     * Precomputed mixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $t2;

    /**
     * Precomputed mixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $t3;

    /**
     * Precomputed invMixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $dt0;

    /**
     * Precomputed invMixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $dt1;

    /**
     * Precomputed invMixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $dt2;

    /**
     * Precomputed invMixColumns table
     *
     * @see Crypt_Rijndael()
     * @var Array
     * @access private
     */
    var $dt3;

    /**
     * The SubByte S-Box
     *
     * @see Crypt_Rijndael::_encryptBlock()
     * @var Array
     * @access private
     */
    var $sbox;

    /**
     * The inverse SubByte S-Box
     *
     * @see Crypt_Rijndael::_decryptBlock()
     * @var Array
     * @access private
     */
    var $isbox;

    /**
     * Performance-optimized callback function for en/decrypt()
     *
     * @see Crypt_Rijndael::encrypt()
     * @see Crypt_Rijndael::decrypt()
     * @see Crypt_Rijndael::inline_crypt_setup()
     * @see Crypt_Rijndael::$use_inline_crypt
     * @var Callback
     * @access private
     */
    var $inline_crypt;

    /**
     * Holds whether performance-optimized $inline_crypt should be used or not.
     *
     * @see Crypt_Rijndael::Crypt_Rijndael()
     * @see Crypt_Rijndael::inline_crypt_setup()
     * @see Crypt_Rijndael::$inline_crypt
     * @var Boolean
     * @access private
     */
    var $use_inline_crypt = true;

    /**
     * Is the mode one that is paddable?
     *
     * @see Crypt_Rijndael::Crypt_Rijndael()
     * @var Boolean
     * @access private
     */
    var $paddable = false;

    /**
     * Encryption buffer for CTR, OFB and CFB modes
     *
     * @see Crypt_Rijndael::encrypt()
     * @var String
     * @access private
     */
    var $enbuffer = array('encrypted' => '', 'xor' => '', 'pos' => 0);

    /**
     * Decryption buffer for CTR, OFB and CFB modes
     *
     * @see Crypt_Rijndael::decrypt()
     * @var String
     * @access private
     */
    var $debuffer = array('ciphertext' => '', 'xor' => '', 'pos' => 0);

    /**
     * Default Constructor.
     *
     * Determines whether or not the mcrypt extension should be used.  $mode should only, at present, be
     * CRYPT_RIJNDAEL_MODE_ECB or CRYPT_RIJNDAEL_MODE_CBC.  If not explictly set, CRYPT_RIJNDAEL_MODE_CBC will be used.
     *
     * @param optional Integer $mode
     * @return Crypt_Rijndael
     * @access public
     */
    function Crypt_Rijndael($mode = CRYPT_RIJNDAEL_MODE_CBC)
    {
        switch ($mode) {
            case CRYPT_RIJNDAEL_MODE_ECB:
            case CRYPT_RIJNDAEL_MODE_CBC:
                $this->paddable = true;
                $this->mode = $mode;
                break;
            case CRYPT_RIJNDAEL_MODE_CTR:
            case CRYPT_RIJNDAEL_MODE_CFB:
            case CRYPT_RIJNDAEL_MODE_OFB:
                $this->mode = $mode;
                break;
            default:
                $this->paddable = true;
                $this->mode = CRYPT_RIJNDAEL_MODE_CBC;
        }

        $t3 = &$this->t3;
        $t2 = &$this->t2;
        $t1 = &$this->t1;
        $t0 = &$this->t0;

        $dt3 = &$this->dt3;
        $dt2 = &$this->dt2;
        $dt1 = &$this->dt1;
        $dt0 = &$this->dt0;

        // according to <http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=19> (section 5.2.1), 
        // precomputed tables can be used in the mixColumns phase.  in that example, they're assigned t0...t3, so
        // those are the names we'll use.
        $t3 = array(
            0x6363A5C6, 0x7C7C84F8, 0x777799EE, 0x7B7B8DF6, 0xF2F20DFF, 0x6B6BBDD6, 0x6F6FB1DE, 0xC5C55491, 
            0x30305060, 0x01010302, 0x6767A9CE, 0x2B2B7D56, 0xFEFE19E7, 0xD7D762B5, 0xABABE64D, 0x76769AEC, 
            0xCACA458F, 0x82829D1F, 0xC9C94089, 0x7D7D87FA, 0xFAFA15EF, 0x5959EBB2, 0x4747C98E, 0xF0F00BFB, 
            0xADADEC41, 0xD4D467B3, 0xA2A2FD5F, 0xAFAFEA45, 0x9C9CBF23, 0xA4A4F753, 0x727296E4, 0xC0C05B9B, 
            0xB7B7C275, 0xFDFD1CE1, 0x9393AE3D, 0x26266A4C, 0x36365A6C, 0x3F3F417E, 0xF7F702F5, 0xCCCC4F83, 
            0x34345C68, 0xA5A5F451, 0xE5E534D1, 0xF1F108F9, 0x717193E2, 0xD8D873AB, 0x31315362, 0x15153F2A, 
            0x04040C08, 0xC7C75295, 0x23236546, 0xC3C35E9D, 0x18182830, 0x9696A137, 0x05050F0A, 0x9A9AB52F, 
            0x0707090E, 0x12123624, 0x80809B1B, 0xE2E23DDF, 0xEBEB26CD, 0x2727694E, 0xB2B2CD7F, 0x75759FEA, 
            0x09091B12, 0x83839E1D, 0x2C2C7458, 0x1A1A2E34, 0x1B1B2D36, 0x6E6EB2DC, 0x5A5AEEB4, 0xA0A0FB5B, 
            0x5252F6A4, 0x3B3B4D76, 0xD6D661B7, 0xB3B3CE7D, 0x29297B52, 0xE3E33EDD, 0x2F2F715E, 0x84849713, 
            0x5353F5A6, 0xD1D168B9, 0x00000000, 0xEDED2CC1, 0x20206040, 0xFCFC1FE3, 0xB1B1C879, 0x5B5BEDB6, 
            0x6A6ABED4, 0xCBCB468D, 0xBEBED967, 0x39394B72, 0x4A4ADE94, 0x4C4CD498, 0x5858E8B0, 0xCFCF4A85, 
            0xD0D06BBB, 0xEFEF2AC5, 0xAAAAE54F, 0xFBFB16ED, 0x4343C586, 0x4D4DD79A, 0x33335566, 0x85859411, 
            0x4545CF8A, 0xF9F910E9, 0x02020604, 0x7F7F81FE, 0x5050F0A0, 0x3C3C4478, 0x9F9FBA25, 0xA8A8E34B, 
            0x5151F3A2, 0xA3A3FE5D, 0x4040C080, 0x8F8F8A05, 0x9292AD3F, 0x9D9DBC21, 0x38384870, 0xF5F504F1, 
            0xBCBCDF63, 0xB6B6C177, 0xDADA75AF, 0x21216342, 0x10103020, 0xFFFF1AE5, 0xF3F30EFD, 0xD2D26DBF, 
            0xCDCD4C81, 0x0C0C1418, 0x13133526, 0xECEC2FC3, 0x5F5FE1BE, 0x9797A235, 0x4444CC88, 0x1717392E, 
            0xC4C45793, 0xA7A7F255, 0x7E7E82FC, 0x3D3D477A, 0x6464ACC8, 0x5D5DE7BA, 0x19192B32, 0x737395E6, 
            0x6060A0C0, 0x81819819, 0x4F4FD19E, 0xDCDC7FA3, 0x22226644, 0x2A2A7E54, 0x9090AB3B, 0x8888830B, 
            0x4646CA8C, 0xEEEE29C7, 0xB8B8D36B, 0x14143C28, 0xDEDE79A7, 0x5E5EE2BC, 0x0B0B1D16, 0xDBDB76AD, 
            0xE0E03BDB, 0x32325664, 0x3A3A4E74, 0x0A0A1E14, 0x4949DB92, 0x06060A0C, 0x24246C48, 0x5C5CE4B8, 
            0xC2C25D9F, 0xD3D36EBD, 0xACACEF43, 0x6262A6C4, 0x9191A839, 0x9595A431, 0xE4E437D3, 0x79798BF2, 
            0xE7E732D5, 0xC8C8438B, 0x3737596E, 0x6D6DB7DA, 0x8D8D8C01, 0xD5D564B1, 0x4E4ED29C, 0xA9A9E049, 
            0x6C6CB4D8, 0x5656FAAC, 0xF4F407F3, 0xEAEA25CF, 0x6565AFCA, 0x7A7A8EF4, 0xAEAEE947, 0x08081810, 
            0xBABAD56F, 0x787888F0, 0x25256F4A, 0x2E2E725C, 0x1C1C2438, 0xA6A6F157, 0xB4B4C773, 0xC6C65197, 
            0xE8E823CB, 0xDDDD7CA1, 0x74749CE8, 0x1F1F213E, 0x4B4BDD96, 0xBDBDDC61, 0x8B8B860D, 0x8A8A850F, 
            0x707090E0, 0x3E3E427C, 0xB5B5C471, 0x6666AACC, 0x4848D890, 0x03030506, 0xF6F601F7, 0x0E0E121C, 
            0x6161A3C2, 0x35355F6A, 0x5757F9AE, 0xB9B9D069, 0x86869117, 0xC1C15899, 0x1D1D273A, 0x9E9EB927, 
            0xE1E138D9, 0xF8F813EB, 0x9898B32B, 0x11113322, 0x6969BBD2, 0xD9D970A9, 0x8E8E8907, 0x9494A733, 
            0x9B9BB62D, 0x1E1E223C, 0x87879215, 0xE9E920C9, 0xCECE4987, 0x5555FFAA, 0x28287850, 0xDFDF7AA5, 
            0x8C8C8F03, 0xA1A1F859, 0x89898009, 0x0D0D171A, 0xBFBFDA65, 0xE6E631D7, 0x4242C684, 0x6868B8D0, 
            0x4141C382, 0x9999B029, 0x2D2D775A, 0x0F0F111E, 0xB0B0CB7B, 0x5454FCA8, 0xBBBBD66D, 0x16163A2C
        );

        $dt3 = array(
            0xF4A75051, 0x4165537E, 0x17A4C31A, 0x275E963A, 0xAB6BCB3B, 0x9D45F11F, 0xFA58ABAC, 0xE303934B, 
            0x30FA5520, 0x766DF6AD, 0xCC769188, 0x024C25F5, 0xE5D7FC4F, 0x2ACBD7C5, 0x35448026, 0x62A38FB5, 
            0xB15A49DE, 0xBA1B6725, 0xEA0E9845, 0xFEC0E15D, 0x2F7502C3, 0x4CF01281, 0x4697A38D, 0xD3F9C66B, 
            0x8F5FE703, 0x929C9515, 0x6D7AEBBF, 0x5259DA95, 0xBE832DD4, 0x7421D358, 0xE0692949, 0xC9C8448E, 
            0xC2896A75, 0x8E7978F4, 0x583E6B99, 0xB971DD27, 0xE14FB6BE, 0x88AD17F0, 0x20AC66C9, 0xCE3AB47D, 
            0xDF4A1863, 0x1A3182E5, 0x51336097, 0x537F4562, 0x6477E0B1, 0x6BAE84BB, 0x81A01CFE, 0x082B94F9, 
            0x48685870, 0x45FD198F, 0xDE6C8794, 0x7BF8B752, 0x73D323AB, 0x4B02E272, 0x1F8F57E3, 0x55AB2A66, 
            0xEB2807B2, 0xB5C2032F, 0xC57B9A86, 0x3708A5D3, 0x2887F230, 0xBFA5B223, 0x036ABA02, 0x16825CED, 
            0xCF1C2B8A, 0x79B492A7, 0x07F2F0F3, 0x69E2A14E, 0xDAF4CD65, 0x05BED506, 0x34621FD1, 0xA6FE8AC4, 
            0x2E539D34, 0xF355A0A2, 0x8AE13205, 0xF6EB75A4, 0x83EC390B, 0x60EFAA40, 0x719F065E, 0x6E1051BD, 
            0x218AF93E, 0xDD063D96, 0x3E05AEDD, 0xE6BD464D, 0x548DB591, 0xC45D0571, 0x06D46F04, 0x5015FF60, 
            0x98FB2419, 0xBDE997D6, 0x4043CC89, 0xD99E7767, 0xE842BDB0, 0x898B8807, 0x195B38E7, 0xC8EEDB79, 
            0x7C0A47A1, 0x420FE97C, 0x841EC9F8, 0x00000000, 0x80868309, 0x2BED4832, 0x1170AC1E, 0x5A724E6C, 
            0x0EFFFBFD, 0x8538560F, 0xAED51E3D, 0x2D392736, 0x0FD9640A, 0x5CA62168, 0x5B54D19B, 0x362E3A24, 
            0x0A67B10C, 0x57E70F93, 0xEE96D2B4, 0x9B919E1B, 0xC0C54F80, 0xDC20A261, 0x774B695A, 0x121A161C, 
            0x93BA0AE2, 0xA02AE5C0, 0x22E0433C, 0x1B171D12, 0x090D0B0E, 0x8BC7ADF2, 0xB6A8B92D, 0x1EA9C814, 
            0xF1198557, 0x75074CAF, 0x99DDBBEE, 0x7F60FDA3, 0x01269FF7, 0x72F5BC5C, 0x663BC544, 0xFB7E345B, 
            0x4329768B, 0x23C6DCCB, 0xEDFC68B6, 0xE4F163B8, 0x31DCCAD7, 0x63851042, 0x97224013, 0xC6112084, 
            0x4A247D85, 0xBB3DF8D2, 0xF93211AE, 0x29A16DC7, 0x9E2F4B1D, 0xB230F3DC, 0x8652EC0D, 0xC1E3D077, 
            0xB3166C2B, 0x70B999A9, 0x9448FA11, 0xE9642247, 0xFC8CC4A8, 0xF03F1AA0, 0x7D2CD856, 0x3390EF22, 
            0x494EC787, 0x38D1C1D9, 0xCAA2FE8C, 0xD40B3698, 0xF581CFA6, 0x7ADE28A5, 0xB78E26DA, 0xADBFA43F, 
            0x3A9DE42C, 0x78920D50, 0x5FCC9B6A, 0x7E466254, 0x8D13C2F6, 0xD8B8E890, 0x39F75E2E, 0xC3AFF582, 
            0x5D80BE9F, 0xD0937C69, 0xD52DA96F, 0x2512B3CF, 0xAC993BC8, 0x187DA710, 0x9C636EE8, 0x3BBB7BDB, 
            0x267809CD, 0x5918F46E, 0x9AB701EC, 0x4F9AA883, 0x956E65E6, 0xFFE67EAA, 0xBCCF0821, 0x15E8E6EF, 
            0xE79BD9BA, 0x6F36CE4A, 0x9F09D4EA, 0xB07CD629, 0xA4B2AF31, 0x3F23312A, 0xA59430C6, 0xA266C035, 
            0x4EBC3774, 0x82CAA6FC, 0x90D0B0E0, 0xA7D81533, 0x04984AF1, 0xECDAF741, 0xCD500E7F, 0x91F62F17, 
            0x4DD68D76, 0xEFB04D43, 0xAA4D54CC, 0x9604DFE4, 0xD1B5E39E, 0x6A881B4C, 0x2C1FB8C1, 0x65517F46, 
            0x5EEA049D, 0x8C355D01, 0x877473FA, 0x0B412EFB, 0x671D5AB3, 0xDBD25292, 0x105633E9, 0xD647136D, 
            0xD7618C9A, 0xA10C7A37, 0xF8148E59, 0x133C89EB, 0xA927EECE, 0x61C935B7, 0x1CE5EDE1, 0x47B13C7A, 
            0xD2DF599C, 0xF2733F55, 0x14CE7918, 0xC737BF73, 0xF7CDEA53, 0xFDAA5B5F, 0x3D6F14DF, 0x44DB8678, 
            0xAFF381CA, 0x68C43EB9, 0x24342C38, 0xA3405FC2, 0x1DC37216, 0xE2250CBC, 0x3C498B28, 0x0D9541FF, 
            0xA8017139, 0x0CB3DE08, 0xB4E49CD8, 0x56C19064, 0xCB84617B, 0x32B670D5, 0x6C5C7448, 0xB85742D0
        );

        for ($i = 0; $i < 256; $i++) {
            $t2[] = (($t3[$i] <<  8) & 0xFFFFFF00) | (($t3[$i] >> 24) & 0x000000FF);
            $t1[] = (($t3[$i] << 16) & 0xFFFF0000) | (($t3[$i] >> 16) & 0x0000FFFF);
            $t0[] = (($t3[$i] << 24) & 0xFF000000) | (($t3[$i] >>  8) & 0x00FFFFFF);

            $dt2[] = (($dt3[$i] <<  8) & 0xFFFFFF00) | (($dt3[$i] >> 24) & 0x000000FF);
            $dt1[] = (($dt3[$i] << 16) & 0xFFFF0000) | (($dt3[$i] >> 16) & 0x0000FFFF);
            $dt0[] = (($dt3[$i] << 24) & 0xFF000000) | (($dt3[$i] >>  8) & 0x00FFFFFF);
        }

        // sbox for the S-Box substitution
        $this->sbox = array(
            0x63, 0x7C, 0x77, 0x7B, 0xF2, 0x6B, 0x6F, 0xC5, 0x30, 0x01, 0x67, 0x2B, 0xFE, 0xD7, 0xAB, 0x76,
            0xCA, 0x82, 0xC9, 0x7D, 0xFA, 0x59, 0x47, 0xF0, 0xAD, 0xD4, 0xA2, 0xAF, 0x9C, 0xA4, 0x72, 0xC0,
            0xB7, 0xFD, 0x93, 0x26, 0x36, 0x3F, 0xF7, 0xCC, 0x34, 0xA5, 0xE5, 0xF1, 0x71, 0xD8, 0x31, 0x15,
            0x04, 0xC7, 0x23, 0xC3, 0x18, 0x96, 0x05, 0x9A, 0x07, 0x12, 0x80, 0xE2, 0xEB, 0x27, 0xB2, 0x75,
            0x09, 0x83, 0x2C, 0x1A, 0x1B, 0x6E, 0x5A, 0xA0, 0x52, 0x3B, 0xD6, 0xB3, 0x29, 0xE3, 0x2F, 0x84,
            0x53, 0xD1, 0x00, 0xED, 0x20, 0xFC, 0xB1, 0x5B, 0x6A, 0xCB, 0xBE, 0x39, 0x4A, 0x4C, 0x58, 0xCF,
            0xD0, 0xEF, 0xAA, 0xFB, 0x43, 0x4D, 0x33, 0x85, 0x45, 0xF9, 0x02, 0x7F, 0x50, 0x3C, 0x9F, 0xA8,
            0x51, 0xA3, 0x40, 0x8F, 0x92, 0x9D, 0x38, 0xF5, 0xBC, 0xB6, 0xDA, 0x21, 0x10, 0xFF, 0xF3, 0xD2,
            0xCD, 0x0C, 0x13, 0xEC, 0x5F, 0x97, 0x44, 0x17, 0xC4, 0xA7, 0x7E, 0x3D, 0x64, 0x5D, 0x19, 0x73,
            0x60, 0x81, 0x4F, 0xDC, 0x22, 0x2A, 0x90, 0x88, 0x46, 0xEE, 0xB8, 0x14, 0xDE, 0x5E, 0x0B, 0xDB,
            0xE0, 0x32, 0x3A, 0x0A, 0x49, 0x06, 0x24, 0x5C, 0xC2, 0xD3, 0xAC, 0x62, 0x91, 0x95, 0xE4, 0x79,
            0xE7, 0xC8, 0x37, 0x6D, 0x8D, 0xD5, 0x4E, 0xA9, 0x6C, 0x56, 0xF4, 0xEA, 0x65, 0x7A, 0xAE, 0x08,
            0xBA, 0x78, 0x25, 0x2E, 0x1C, 0xA6, 0xB4, 0xC6, 0xE8, 0xDD, 0x74, 0x1F, 0x4B, 0xBD, 0x8B, 0x8A,
            0x70, 0x3E, 0xB5, 0x66, 0x48, 0x03, 0xF6, 0x0E, 0x61, 0x35, 0x57, 0xB9, 0x86, 0xC1, 0x1D, 0x9E,
            0xE1, 0xF8, 0x98, 0x11, 0x69, 0xD9, 0x8E, 0x94, 0x9B, 0x1E, 0x87, 0xE9, 0xCE, 0x55, 0x28, 0xDF,
            0x8C, 0xA1, 0x89, 0x0D, 0xBF, 0xE6, 0x42, 0x68, 0x41, 0x99, 0x2D, 0x0F, 0xB0, 0x54, 0xBB, 0x16
        );

        // sbox for the inverse S-Box substitution
        $this->isbox = array(
            0x52, 0x09, 0x6A, 0xD5, 0x30, 0x36, 0xA5, 0x38, 0xBF, 0x40, 0xA3, 0x9E, 0x81, 0xF3, 0xD7, 0xFB,
            0x7C, 0xE3, 0x39, 0x82, 0x9B, 0x2F, 0xFF, 0x87, 0x34, 0x8E, 0x43, 0x44, 0xC4, 0xDE, 0xE9, 0xCB,
            0x54, 0x7B, 0x94, 0x32, 0xA6, 0xC2, 0x23, 0x3D, 0xEE, 0x4C, 0x95, 0x0B, 0x42, 0xFA, 0xC3, 0x4E,
            0x08, 0x2E, 0xA1, 0x66, 0x28, 0xD9, 0x24, 0xB2, 0x76, 0x5B, 0xA2, 0x49, 0x6D, 0x8B, 0xD1, 0x25,
            0x72, 0xF8, 0xF6, 0x64, 0x86, 0x68, 0x98, 0x16, 0xD4, 0xA4, 0x5C, 0xCC, 0x5D, 0x65, 0xB6, 0x92,
            0x6C, 0x70, 0x48, 0x50, 0xFD, 0xED, 0xB9, 0xDA, 0x5E, 0x15, 0x46, 0x57, 0xA7, 0x8D, 0x9D, 0x84,
            0x90, 0xD8, 0xAB, 0x00, 0x8C, 0xBC, 0xD3, 0x0A, 0xF7, 0xE4, 0x58, 0x05, 0xB8, 0xB3, 0x45, 0x06,
            0xD0, 0x2C, 0x1E, 0x8F, 0xCA, 0x3F, 0x0F, 0x02, 0xC1, 0xAF, 0xBD, 0x03, 0x01, 0x13, 0x8A, 0x6B,
            0x3A, 0x91, 0x11, 0x41, 0x4F, 0x67, 0xDC, 0xEA, 0x97, 0xF2, 0xCF, 0xCE, 0xF0, 0xB4, 0xE6, 0x73,
            0x96, 0xAC, 0x74, 0x22, 0xE7, 0xAD, 0x35, 0x85, 0xE2, 0xF9, 0x37, 0xE8, 0x1C, 0x75, 0xDF, 0x6E,
            0x47, 0xF1, 0x1A, 0x71, 0x1D, 0x29, 0xC5, 0x89, 0x6F, 0xB7, 0x62, 0x0E, 0xAA, 0x18, 0xBE, 0x1B,
            0xFC, 0x56, 0x3E, 0x4B, 0xC6, 0xD2, 0x79, 0x20, 0x9A, 0xDB, 0xC0, 0xFE, 0x78, 0xCD, 0x5A, 0xF4,
            0x1F, 0xDD, 0xA8, 0x33, 0x88, 0x07, 0xC7, 0x31, 0xB1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xEC, 0x5F,
            0x60, 0x51, 0x7F, 0xA9, 0x19, 0xB5, 0x4A, 0x0D, 0x2D, 0xE5, 0x7A, 0x9F, 0x93, 0xC9, 0x9C, 0xEF,
            0xA0, 0xE0, 0x3B, 0x4D, 0xAE, 0x2A, 0xF5, 0xB0, 0xC8, 0xEB, 0xBB, 0x3C, 0x83, 0x53, 0x99, 0x61,
            0x17, 0x2B, 0x04, 0x7E, 0xBA, 0x77, 0xD6, 0x26, 0xE1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0C, 0x7D
        );

        if (!function_exists('create_function') || !is_callable('create_function')) {
            $this->use_inline_crypt = false;
        }
    }

    /**
     * Sets the key.
     *
     * Keys can be of any length.  Rijndael, itself, requires the use of a key that's between 128-bits and 256-bits long and
     * whose length is a multiple of 32.  If the key is less than 256-bits and the key length isn't set, we round the length
     * up to the closest valid key length, padding $key with null bytes.  If the key is more than 256-bits, we trim the
     * excess bits.
     *
     * If the key is not explicitly set, it'll be assumed to be all null bytes.
     *
     * @access public
     * @param String $key
     */
    function setKey($key)
    {
        $this->key = $key;
        $this->changed = true;
    }

    /**
     * Sets the initialization vector. (optional)
     *
     * SetIV is not required when CRYPT_RIJNDAEL_MODE_ECB is being used.  If not explictly set, it'll be assumed
     * to be all zero's.
     *
     * @access public
     * @param String $iv
     */
    function setIV($iv)
    {
        $this->encryptIV = $this->decryptIV = $this->iv = str_pad(substr($iv, 0, $this->block_size), $this->block_size, chr(0));
    }

    /**
     * Sets the key length
     *
     * Valid key lengths are 128, 160, 192, 224, and 256.  If the length is less than 128, it will be rounded up to
     * 128.  If the length is greater then 128 and invalid, it will be rounded down to the closest valid amount.
     *
     * @access public
     * @param Integer $length
     */
    function setKeyLength($length)
    {
        $length >>= 5;
        if ($length > 8) {
            $length = 8;
        } else if ($length < 4) {
            $length = 4;
        }
        $this->Nk = $length;
        $this->key_size = $length << 2;

        $this->explicit_key_length = true;
        $this->changed = true;
    }

    /**
     * Sets the password.
     *
     * Depending on what $method is set to, setPassword()'s (optional) parameters are as follows:
     *     {@link http://en.wikipedia.org/wiki/PBKDF2 pbkdf2}:
     *         $hash, $salt, $method
     *     Set $dkLen by calling setKeyLength()
     *
     * @param String $password
     * @param optional String $method
     * @access public
     */
    function setPassword($password, $method = 'pbkdf2')
    {
        $key = '';

        switch ($method) {
            default: // 'pbkdf2'
                list(, , $hash, $salt, $count) = func_get_args();
                if (!isset($hash)) {
                    $hash = 'sha1';
                }
                // WPA and WPA2 use the SSID as the salt
                if (!isset($salt)) {
                    $salt = 'phpseclib';
                }
                // RFC2898#section-4.2 uses 1,000 iterations by default
                // WPA and WPA2 use 4,096.
                if (!isset($count)) {
                    $count = 1000;
                }

                if (!class_exists('Crypt_Hash')) {
                    require_once('Crypt/Hash.php');
                }

                $i = 1;
                while (strlen($key) < $this->key_size) { // $dkLen == $this->key_size
                    //$dk.= $this->_pbkdf($password, $salt, $count, $i++);
                    $hmac = new Crypt_Hash();
                    $hmac->setHash($hash);
                    $hmac->setKey($password);
                    $f = $u = $hmac->hash($salt . pack('N', $i++));
                    for ($j = 2; $j <= $count; $j++) {
                        $u = $hmac->hash($u);
                        $f^= $u;
                    }
                    $key.= $f;
                }
        }

        $this->setKey(substr($key, 0, $this->key_size));
    }

    /**
     * Sets the block length
     *
     * Valid block lengths are 128, 160, 192, 224, and 256.  If the length is less than 128, it will be rounded up to
     * 128.  If the length is greater then 128 and invalid, it will be rounded down to the closest valid amount.
     *
     * @access public
     * @param Integer $length
     */
    function setBlockLength($length)
    {
        $length >>= 5;
        if ($length > 8) {
            $length = 8;
        } else if ($length < 4) {
            $length = 4;
        }
        $this->Nb = $length;
        $this->block_size = $length << 2;
        $this->changed = true;
    }

    /**
     * Generate CTR XOR encryption key
     *
     * Encrypt the output of this and XOR it against the ciphertext / plaintext to get the
     * plaintext / ciphertext in CTR mode.
     *
     * @see Crypt_Rijndael::decrypt()
     * @see Crypt_Rijndael::encrypt()
     * @access public
     * @param Integer $length
     * @param String $iv
     */
    function _generate_xor($length, &$iv)
    {
        $xor = '';
        $block_size = $this->block_size;
        $num_blocks = floor(($length + ($block_size - 1)) / $block_size);
        for ($i = 0; $i < $num_blocks; $i++) {
            $xor.= $iv;
            for ($j = 4; $j <= $block_size; $j+=4) {
                $temp = substr($iv, -$j, 4);
                switch ($temp) {
                    case "\xFF\xFF\xFF\xFF":
                        $iv = substr_replace($iv, "\x00\x00\x00\x00", -$j, 4);
                        break;
                    case "\x7F\xFF\xFF\xFF":
                        $iv = substr_replace($iv, "\x80\x00\x00\x00", -$j, 4);
                        break 2;
                    default:
                        extract(unpack('Ncount', $temp));
                        $iv = substr_replace($iv, pack('N', $count + 1), -$j, 4);
                        break 2;
                }
            }
        }

        return $xor;
    }

    /**
     * Encrypts a message.
     *
     * $plaintext will be padded with additional bytes such that it's length is a multiple of the block size.  Other Rjindael
     * implementations may or may not pad in the same manner.  Other common approaches to padding and the reasons why it's
     * necessary are discussed in the following
     * URL:
     *
     * {@link http://www.di-mgt.com.au/cryptopad.html http://www.di-mgt.com.au/cryptopad.html}
     *
     * An alternative to padding is to, separately, send the length of the file.  This is what SSH, in fact, does.
     * strlen($plaintext) will still need to be a multiple of 8, however, arbitrary values can be added to make it that
     * length.
     *
     * @see Crypt_Rijndael::decrypt()
     * @access public
     * @param String $plaintext
     */
    function encrypt($plaintext)
    {
        if ($this->changed) {
            $this->_setup();
        }
        if ($this->use_inline_crypt) {
            $inline = $this->inline_crypt;
            return $inline('encrypt', $this, $plaintext);
        }
        if ($this->paddable) {
            $plaintext = $this->_pad($plaintext);
        }

        $block_size = $this->block_size;
        $buffer = &$this->enbuffer;
        $ciphertext = '';
        switch ($this->mode) {
            case CRYPT_RIJNDAEL_MODE_ECB:
                for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
                    $ciphertext.= $this->_encryptBlock(substr($plaintext, $i, $block_size));
                }
                break;
            case CRYPT_RIJNDAEL_MODE_CBC:
                $xor = $this->encryptIV;
                for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
                    $block = substr($plaintext, $i, $block_size);
                    $block = $this->_encryptBlock($block ^ $xor);
                    $xor = $block;
                    $ciphertext.= $block;
                }
                if ($this->continuousBuffer) {
                    $this->encryptIV = $xor;
                }
                break;
            case CRYPT_RIJNDAEL_MODE_CTR:
                $xor = $this->encryptIV;
                if (strlen($buffer['encrypted'])) {
                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
                        $block = substr($plaintext, $i, $block_size);
                        if (strlen($block) > strlen($buffer['encrypted'])) {
                            $buffer['encrypted'].= $this->_encryptBlock($this->_generate_xor($block_size, $xor));
                        }
                        $key = $this->_string_shift($buffer['encrypted'], $block_size);
                        $ciphertext.= $block ^ $key;
                    }
                } else {
                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
                        $block = substr($plaintext, $i, $block_size);
                        $key = $this->_encryptBlock($this->_generate_xor($block_size, $xor));
                        $ciphertext.= $block ^ $key;
                    }
                }
                if ($this->continuousBuffer) {
                    $this->encryptIV = $xor;
                    if ($start = strlen($plaintext) % $block_size) {
                        $buffer['encrypted'] = substr($key, $start) . $buffer['encrypted'];
                    }
                }
                break;
            case CRYPT_RIJNDAEL_MODE_CFB:
                // cfb loosely routines inspired by openssl's:
                // http://cvs.openssl.org/fileview?f=openssl/crypto/modes/cfb128.c&v=1.3.2.2.2.1
                if ($this->continuousBuffer) {
                    $iv = &$this->encryptIV;
                    $pos = &$buffer['pos'];
                } else {
                    $iv = $this->encryptIV;
                    $pos = 0;
                }
                $len = strlen($plaintext);
                $i = 0;
                if ($pos) {
                    $orig_pos = $pos;
                    $max = $block_size - $pos;
                    if ($len >= $max) {
                        $i = $max;
                        $len-= $max;
                        $pos = 0;
                    } else {
                        $i = $len;
                        $pos+= $len;
                        $len = 0;
                    }
                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
                    $ciphertext = substr($iv, $orig_pos) ^ $plaintext;
                    $iv = substr_replace($iv, $ciphertext, $orig_pos, $i);
                }
                while ($len >= $block_size) {
                    $iv = $this->_encryptBlock($iv) ^ substr($plaintext, $i, $block_size);
                    $ciphertext.= $iv;
                    $len-= $block_size;
                    $i+= $block_size;
                }
                if ($len) {
                    $iv = $this->_encryptBlock($iv);
                    $block = $iv ^ substr($plaintext, $i);
                    $iv = substr_replace($iv, $block, 0, $len);
                    $ciphertext.= $block;
                    $pos = $len;
                }
                break;
            case CRYPT_RIJNDAEL_MODE_OFB:
                $xor = $this->encryptIV;
                if (strlen($buffer['xor'])) {
                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
                        $xor = $this->_encryptBlock($xor);
                        $buffer['xor'].= $xor;
                        $key = $this->_string_shift($buffer['xor'], $block_size);
                        $ciphertext.= substr($plaintext, $i, $block_size) ^ $key;
                    }
                } else {
                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
                        $xor = $this->_encryptBlock($xor);
                        $ciphertext.= substr($plaintext, $i, $block_size) ^ $xor;
                    }
                    $key = $xor;
                }
                if ($this->continuousBuffer) {
                    $this->encryptIV = $xor;
                    if ($start = strlen($plaintext) % $block_size) {
                         $buffer['xor'] = substr($key, $start) . $buffer['xor'];
                    }
                }
        }

        return $ciphertext;
    }

    /**
     * Decrypts a message.
     *
     * If strlen($ciphertext) is not a multiple of the block size, null bytes will be added to the end of the string until
     * it is.
     *
     * @see Crypt_Rijndael::encrypt()
     * @access public
     * @param String $ciphertext
     */
    function decrypt($ciphertext)
    {
        if ($this->changed) {
            $this->_setup();
        }
        if ($this->use_inline_crypt) {
            $inline = $this->inline_crypt;
            return $inline('decrypt', $this, $ciphertext);
        }
        if ($this->paddable) {
            // we pad with chr(0) since that's what mcrypt_generic does.  to quote from http://php.net/function.mcrypt-generic :
            // "The data is padded with "\0" to make sure the length of the data is n * blocksize."
            $ciphertext = str_pad($ciphertext, strlen($ciphertext) + ($this->block_size - strlen($ciphertext) % $this->block_size) % $this->block_size, chr(0));
        }

        $block_size = $this->block_size;
        $buffer = &$this->debuffer;
        $plaintext = '';
        switch ($this->mode) {
            case CRYPT_RIJNDAEL_MODE_ECB:
                for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
                    $plaintext.= $this->_decryptBlock(substr($ciphertext, $i, $block_size));
                }
                break;
            case CRYPT_RIJNDAEL_MODE_CBC:
                $xor = $this->decryptIV;
                for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
                    $block = substr($ciphertext, $i, $block_size);
                    $plaintext.= $this->_decryptBlock($block) ^ $xor;
                    $xor = $block;
                }
                if ($this->continuousBuffer) {
                    $this->decryptIV = $xor;
                }
                break;
            case CRYPT_RIJNDAEL_MODE_CTR:
                $xor = $this->decryptIV;
                if (strlen($buffer['ciphertext'])) {
                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
                        $block = substr($ciphertext, $i, $block_size);
                        if (strlen($block) > strlen($buffer['ciphertext'])) {
                            $buffer['ciphertext'].= $this->_encryptBlock($this->_generate_xor($block_size, $xor));
                        }
                        $key = $this->_string_shift($buffer['ciphertext'], $block_size);
                        $plaintext.= $block ^ $key;
                    }
                } else {
                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
                        $block = substr($ciphertext, $i, $block_size);
                        $key = $this->_encryptBlock($this->_generate_xor($block_size, $xor));
                        $plaintext.= $block ^ $key;
                    }
                }
                if ($this->continuousBuffer) {
                    $this->decryptIV = $xor;
                    if ($start = strlen($ciphertext) % $block_size) {
                        $buffer['ciphertext'] = substr($key, $start) . $buffer['ciphertext'];
                    }
                }
                break;
            case CRYPT_RIJNDAEL_MODE_CFB:
                if ($this->continuousBuffer) {
                    $iv = &$this->decryptIV;
                    $pos = &$buffer['pos'];
                } else {
                    $iv = $this->decryptIV;
                    $pos = 0;
                }
                $len = strlen($ciphertext);
                $i = 0;
                if ($pos) {
                    $orig_pos = $pos;
                    $max = $block_size - $pos;
                    if ($len >= $max) {
                        $i = $max;
                        $len-= $max;
                        $pos = 0;
                    } else {
                        $i = $len;
                        $pos+= $len;
                        $len = 0;
                    }
                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
                    $plaintext = substr($iv, $orig_pos) ^ $ciphertext;
                    $iv = substr_replace($iv, substr($ciphertext, 0, $i), $orig_pos, $i);
                }
                while ($len >= $block_size) {
                    $iv = $this->_encryptBlock($iv);
                    $cb = substr($ciphertext, $i, $block_size);
                    $plaintext.= $iv ^ $cb;
                    $iv = $cb;
                    $len-= $block_size;
                    $i+= $block_size;
                }
                if ($len) {
                    $iv = $this->_encryptBlock($iv);
                    $plaintext.= $iv ^ substr($ciphertext, $i);
                    $iv = substr_replace($iv, substr($ciphertext, $i), 0, $len);
                    $pos = $len;
                }
                break;
            case CRYPT_RIJNDAEL_MODE_OFB:
                $xor = $this->decryptIV;
                if (strlen($buffer['xor'])) {
                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
                        $xor = $this->_encryptBlock($xor);
                        $buffer['xor'].= $xor;
                        $key = $this->_string_shift($buffer['xor'], $block_size);
                        $plaintext.= substr($ciphertext, $i, $block_size) ^ $key;
                    }
                } else {
                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
                        $xor = $this->_encryptBlock($xor);
                        $plaintext.= substr($ciphertext, $i, $block_size) ^ $xor;
                    }
                    $key = $xor;
                }
                if ($this->continuousBuffer) {
                    $this->decryptIV = $xor;
                    if ($start = strlen($ciphertext) % $block_size) {
                         $buffer['xor'] = substr($key, $start) . $buffer['xor'];
                    }
                }
        }

        return $this->paddable ? $this->_unpad($plaintext) : $plaintext;
    }

    /**
     * Encrypts a block
     *
     * @access private
     * @param String $in
     * @return String
     */
    function _encryptBlock($in)
    {
        $state = array();
        $words = unpack('N*word', $in);

        $w = $this->w;
        $t0 = $this->t0;
        $t1 = $this->t1;
        $t2 = $this->t2;
        $t3 = $this->t3;
        $Nb = $this->Nb;
        $Nr = $this->Nr;
        $c = $this->c;

        // addRoundKey
        $i = -1;
        foreach ($words as $word) {
            $state[] = $word ^ $w[0][++$i];
        }

        // fips-197.pdf#page=19, "Figure 5. Pseudo Code for the Cipher", states that this loop has four components - 
        // subBytes, shiftRows, mixColumns, and addRoundKey. fips-197.pdf#page=30, "Implementation Suggestions Regarding 
        // Various Platforms" suggests that performs enhanced implementations are described in Rijndael-ammended.pdf.
        // Rijndael-ammended.pdf#page=20, "Implementation aspects / 32-bit processor", discusses such an optimization.
        // Unfortunately, the description given there is not quite correct.  Per aes.spec.v316.pdf#page=19 [1], 
        // equation (7.4.7) is supposed to use addition instead of subtraction, so we'll do that here, as well.

        // [1] http://fp.gladman.plus.com/cryptography_technology/rijndael/aes.spec.v316.pdf
        $temp = array();
        for ($round = 1; $round < $Nr; ++$round) {
            $i = 0; // $c[0] == 0
            $j = $c[1];
            $k = $c[2];
            $l = $c[3];

            while ($i < $Nb) {
                $temp[$i] = $t0[$state[$i] >> 24 & 0x000000FF] ^
                            $t1[$state[$j] >> 16 & 0x000000FF] ^
                            $t2[$state[$k] >>  8 & 0x000000FF] ^
                            $t3[$state[$l]       & 0x000000FF] ^
                            $w[$round][$i];
                ++$i;
                $j = ($j + 1) % $Nb;
                $k = ($k + 1) % $Nb;
                $l = ($l + 1) % $Nb;
            }
            $state = $temp;
        }

        // subWord
        for ($i = 0; $i < $Nb; ++$i) {
            $state[$i] = $this->_subWord($state[$i]);
        }

        // shiftRows + addRoundKey
        $i = 0; // $c[0] == 0
        $j = $c[1];
        $k = $c[2];
        $l = $c[3];
        while ($i < $Nb) {
            $temp[$i] = ($state[$i] & 0xFF000000) ^
                        ($state[$j] & 0x00FF0000) ^
                        ($state[$k] & 0x0000FF00) ^
                        ($state[$l] & 0x000000FF) ^
                         $w[$Nr][$i];
            ++$i;
            $j = ($j + 1) % $Nb;
            $k = ($k + 1) % $Nb;
            $l = ($l + 1) % $Nb;
        }

        // 100% ugly switch/case code... but ~5% faster (meaning: ~half second faster de/encrypting 1MB text, tested with php5.4.9 on linux/32bit with an AMD Athlon II P360 CPU) then the commented smart code below. Don't know it's worth or not
        switch ($Nb) {
            case 8:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4], $temp[5], $temp[6], $temp[7]);
            case 7:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4], $temp[5], $temp[6]);
            case 6:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4], $temp[5]);
            case 5:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4]);
            default:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3]);
        }
        /*
        $state = $temp;

        array_unshift($state, 'N*');

        return call_user_func_array('pack', $state);
        */
    }

    /**
     * Decrypts a block
     *
     * @access private
     * @param String $in
     * @return String
     */
    function _decryptBlock($in)
    {
        $state = array();
        $words = unpack('N*word', $in);

        $dw = $this->dw;
        $dt0 = $this->dt0;
        $dt1 = $this->dt1;
        $dt2 = $this->dt2;
        $dt3 = $this->dt3;
        $Nb = $this->Nb;
        $Nr = $this->Nr;
        $c = $this->c;

        // addRoundKey
        $i = -1;
        foreach ($words as $word) {
            $state[] = $word ^ $dw[$Nr][++$i];
        }

        $temp = array();
        for ($round = $Nr - 1; $round > 0; --$round) {
            $i = 0; // $c[0] == 0
            $j = $Nb - $c[1];
            $k = $Nb - $c[2];
            $l = $Nb - $c[3];

            while ($i < $Nb) {
                $temp[$i] = $dt0[$state[$i] >> 24 & 0x000000FF] ^
                            $dt1[$state[$j] >> 16 & 0x000000FF] ^
                            $dt2[$state[$k] >>  8 & 0x000000FF] ^
                            $dt3[$state[$l]       & 0x000000FF] ^
                            $dw[$round][$i];
                ++$i;
                $j = ($j + 1) % $Nb;
                $k = ($k + 1) % $Nb;
                $l = ($l + 1) % $Nb;
            }
            $state = $temp;
        }

        // invShiftRows + invSubWord + addRoundKey
        $i = 0; // $c[0] == 0
        $j = $Nb - $c[1];
        $k = $Nb - $c[2];
        $l = $Nb - $c[3];

        while ($i < $Nb) {
            $temp[$i] = $dw[0][$i] ^ 
                        $this->_invSubWord(($state[$i] & 0xFF000000) | 
                                           ($state[$j] & 0x00FF0000) | 
                                           ($state[$k] & 0x0000FF00) | 
                                           ($state[$l] & 0x000000FF));
            ++$i;
            $j = ($j + 1) % $Nb;
            $k = ($k + 1) % $Nb;
            $l = ($l + 1) % $Nb;
        }

        switch ($Nb) {
            case 8:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4], $temp[5], $temp[6], $temp[7]);
            case 7:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4], $temp[5], $temp[6]);
            case 6:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4], $temp[5]);
            case 5:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3], $temp[4]);
            default:
                return pack('N*', $temp[0], $temp[1], $temp[2], $temp[3]);
        }
        /*
        $state = $temp;

        array_unshift($state, 'N*');

        return call_user_func_array('pack', $state);
        */
    }

    /**
     * Setup Rijndael
     *
     * Validates all the variables and calculates $Nr - the number of rounds that need to be performed - and $w - the key
     * key schedule.
     *
     * @access private
     */
    function _setup()
    {
        // Each number in $rcon is equal to the previous number multiplied by two in Rijndael's finite field.
        // See http://en.wikipedia.org/wiki/Finite_field_arithmetic#Multiplicative_inverse
        static $rcon = array(0,
            0x01000000, 0x02000000, 0x04000000, 0x08000000, 0x10000000,
            0x20000000, 0x40000000, 0x80000000, 0x1B000000, 0x36000000,
            0x6C000000, 0xD8000000, 0xAB000000, 0x4D000000, 0x9A000000,
            0x2F000000, 0x5E000000, 0xBC000000, 0x63000000, 0xC6000000,
            0x97000000, 0x35000000, 0x6A000000, 0xD4000000, 0xB3000000,
            0x7D000000, 0xFA000000, 0xEF000000, 0xC5000000, 0x91000000
        );

        if (!$this->explicit_key_length) {
            // we do >> 2, here, and not >> 5, as we do above, since strlen($this->key) tells us the number of bytes - not bits
            $length = strlen($this->key) >> 2;
            if ($length > 8) {
                $length = 8;
            } else if ($length < 4) {
                $length = 4;
            }
            $this->Nk = $length;
            $this->key_size = $length << 2;
        }

        $this->key = str_pad(substr($this->key, 0, $this->key_size), $this->key_size, chr(0));
        $this->encryptIV = $this->decryptIV = $this->iv = str_pad(substr($this->iv, 0, $this->block_size), $this->block_size, chr(0));

        // see Rijndael-ammended.pdf#page=44
        $this->Nr = max($this->Nk, $this->Nb) + 6;

        // shift offsets for Nb = 5, 7 are defined in Rijndael-ammended.pdf#page=44,
        //     "Table 8: Shift offsets in Shiftrow for the alternative block lengths"
        // shift offsets for Nb = 4, 6, 8 are defined in Rijndael-ammended.pdf#page=14,
        //     "Table 2: Shift offsets for different block lengths"
        switch ($this->Nb) {
            case 4:
            case 5:
            case 6:
                $this->c = array(0, 1, 2, 3);
                break;
            case 7:
                $this->c = array(0, 1, 2, 4);
                break;
            case 8:
                $this->c = array(0, 1, 3, 4);
        }

        $key = $this->key;

        $w = array_values(unpack('N*words', $key));

        $length = $this->Nb * ($this->Nr + 1);
        for ($i = $this->Nk; $i < $length; $i++) {
            $temp = $w[$i - 1];
            if ($i % $this->Nk == 0) {
                // according to <http://php.net/language.types.integer>, "the size of an integer is platform-dependent".
                // on a 32-bit machine, it's 32-bits, and on a 64-bit machine, it's 64-bits. on a 32-bit machine,
                // 0xFFFFFFFF << 8 == 0xFFFFFF00, but on a 64-bit machine, it equals 0xFFFFFFFF00. as such, doing 'and'
                // with 0xFFFFFFFF (or 0xFFFFFF00) on a 32-bit machine is unnecessary, but on a 64-bit machine, it is.
                $temp = (($temp << 8) & 0xFFFFFF00) | (($temp >> 24) & 0x000000FF); // rotWord
                $temp = $this->_subWord($temp) ^ $rcon[$i / $this->Nk];
            } else if ($this->Nk > 6 && $i % $this->Nk == 4) {
                $temp = $this->_subWord($temp);
            }
            $w[$i] = $w[$i - $this->Nk] ^ $temp;
        }

        // convert the key schedule from a vector of $Nb * ($Nr + 1) length to a matrix with $Nr + 1 rows and $Nb columns
        // and generate the inverse key schedule.  more specifically,
        // according to <http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=23> (section 5.3.3), 
        // "The key expansion for the Inverse Cipher is defined as follows:
        //        1. Apply the Key Expansion.
        //        2. Apply InvMixColumn to all Round Keys except the first and the last one."
        // also, see fips-197.pdf#page=27, "5.3.5 Equivalent Inverse Cipher"
        $temp = $this->w = $this->dw = array();
        for ($i = $row = $col = 0; $i < $length; $i++, $col++) {
            if ($col == $this->Nb) {
                if ($row == 0) {
                    $this->dw[0] = $this->w[0];
                } else {
                    // subWord + invMixColumn + invSubWord = invMixColumn
                    $j = 0;
                    while ($j < $this->Nb) {
                        $dw = $this->_subWord($this->w[$row][$j]);
                        $temp[$j] = $this->dt0[$dw >> 24 & 0x000000FF] ^ 
                                    $this->dt1[$dw >> 16 & 0x000000FF] ^ 
                                    $this->dt2[$dw >>  8 & 0x000000FF] ^ 
                                    $this->dt3[$dw       & 0x000000FF];
                        $j++;
                    }
                    $this->dw[$row] = $temp;
                }

                $col = 0;
                $row++;
            }
            $this->w[$row][$col] = $w[$i];
        }

        $this->dw[$row] = $this->w[$row];

        // In case of $this->use_inline_crypt === true we have to use 1-dim key arrays (both ascending)
        if ($this->use_inline_crypt) {
            $this->dw = array_reverse($this->dw);
            $w  = array_pop($this->w);
            $dw = array_pop($this->dw);
            foreach ($this->w as $r => $wr) {
                foreach ($wr as $c => $wc) {
                    $w[]  = $wc;
                    $dw[] = $this->dw[$r][$c];
                }
            }
            $this->w  = $w;
            $this->dw = $dw;

            $this->inline_crypt_setup();
        }

        $this->changed = false;
    }

    /**
     * Performs S-Box substitutions
     *
     * @access private
     */
    function _subWord($word)
    {
        $sbox = $this->sbox;

        return  $sbox[$word       & 0x000000FF]        |
               ($sbox[$word >>  8 & 0x000000FF] <<  8) |
               ($sbox[$word >> 16 & 0x000000FF] << 16) |
               ($sbox[$word >> 24 & 0x000000FF] << 24);
    }

    /**
     * Performs inverse S-Box substitutions
     *
     * @access private
     */
    function _invSubWord($word)
    {
        $isbox = $this->isbox;

        return  $isbox[$word       & 0x000000FF]        |
               ($isbox[$word >>  8 & 0x000000FF] <<  8) |
               ($isbox[$word >> 16 & 0x000000FF] << 16) |
               ($isbox[$word >> 24 & 0x000000FF] << 24);
    }

    /**
     * Pad "packets".
     *
     * Rijndael works by encrypting between sixteen and thirty-two bytes at a time, provided that number is also a multiple
     * of four.  If you ever need to encrypt or decrypt something that isn't of the proper length, it becomes necessary to
     * pad the input so that it is of the proper length.
     *
     * Padding is enabled by default.  Sometimes, however, it is undesirable to pad strings.  Such is the case in SSH,
     * where "packets" are padded with random bytes before being encrypted.  Unpad these packets and you risk stripping
     * away characters that shouldn't be stripped away. (SSH knows how many bytes are added because the length is
     * transmitted separately)
     *
     * @see Crypt_Rijndael::disablePadding()
     * @access public
     */
    function enablePadding()
    {
        $this->padding = true;
    }

    /**
     * Do not pad packets.
     *
     * @see Crypt_Rijndael::enablePadding()
     * @access public
     */
    function disablePadding()
    {
        $this->padding = false;
    }

    /**
     * Pads a string
     *
     * Pads a string using the RSA PKCS padding standards so that its length is a multiple of the blocksize.
     * $block_size - (strlen($text) % $block_size) bytes are added, each of which is equal to 
     * chr($block_size - (strlen($text) % $block_size)
     *
     * If padding is disabled and $text is not a multiple of the blocksize, the string will be padded regardless
     * and padding will, hence forth, be enabled.
     *
     * @see Crypt_Rijndael::_unpad()
     * @access private
     */
    function _pad($text)
    {
        $length = strlen($text);

        if (!$this->padding) {
            if ($length % $this->block_size == 0) {
                return $text;
            } else {
                user_error("The plaintext's length ($length) is not a multiple of the block size ({$this->block_size})");
                $this->padding = true;
            }
        }

        $pad = $this->block_size - ($length % $this->block_size);

        return str_pad($text, $length + $pad, chr($pad));
    }

    /**
     * Unpads a string.
     *
     * If padding is enabled and the reported padding length is invalid the encryption key will be assumed to be wrong
     * and false will be returned.
     *
     * @see Crypt_Rijndael::_pad()
     * @access private
     */
    function _unpad($text)
    {
        if (!$this->padding) {
            return $text;
        }

        $length = ord($text[strlen($text) - 1]);

        if (!$length || $length > $this->block_size) {
            return false;
        }

        return substr($text, 0, -$length);
    }

    /**
     * Treat consecutive "packets" as if they are a continuous buffer.
     *
     * Say you have a 32-byte plaintext $plaintext.  Using the default behavior, the two following code snippets
     * will yield different outputs:
     *
     * <code>
     *    echo $rijndael->encrypt(substr($plaintext,  0, 16));
     *    echo $rijndael->encrypt(substr($plaintext, 16, 16));
     * </code>
     * <code>
     *    echo $rijndael->encrypt($plaintext);
     * </code>
     *
     * The solution is to enable the continuous buffer.  Although this will resolve the above discrepancy, it creates
     * another, as demonstrated with the following:
     *
     * <code>
     *    $rijndael->encrypt(substr($plaintext, 0, 16));
     *    echo $rijndael->decrypt($des->encrypt(substr($plaintext, 16, 16)));
     * </code>
     * <code>
     *    echo $rijndael->decrypt($des->encrypt(substr($plaintext, 16, 16)));
     * </code>
     *
     * With the continuous buffer disabled, these would yield the same output.  With it enabled, they yield different
     * outputs.  The reason is due to the fact that the initialization vector's change after every encryption /
     * decryption round when the continuous buffer is enabled.  When it's disabled, they remain constant.
     *
     * Put another way, when the continuous buffer is enabled, the state of the Crypt_Rijndael() object changes after each
     * encryption / decryption round, whereas otherwise, it'd remain constant.  For this reason, it's recommended that
     * continuous buffers not be used.  They do offer better security and are, in fact, sometimes required (SSH uses them),
     * however, they are also less intuitive and more likely to cause you problems.
     *
     * @see Crypt_Rijndael::disableContinuousBuffer()
     * @access public
     */
    function enableContinuousBuffer()
    {
        $this->continuousBuffer = true;
    }

    /**
     * Treat consecutive packets as if they are a discontinuous buffer.
     *
     * The default behavior.
     *
     * @see Crypt_Rijndael::enableContinuousBuffer()
     * @access public
     */
    function disableContinuousBuffer()
    {
        $this->continuousBuffer = false;
        $this->encryptIV = $this->iv;
        $this->decryptIV = $this->iv;
        $this->enbuffer = array('encrypted' => '', 'xor' => '', 'pos' => 0);
        $this->debuffer = array('ciphertext' => '', 'xor' => '', 'pos' => 0);
    }

    /**
     * String Shift
     *
     * Inspired by array_shift
     *
     * @param String $string
     * @param optional Integer $index
     * @return String
     * @access private
     */
    function _string_shift(&$string, $index = 1)
    {
        $substr = substr($string, 0, $index);
        $string = substr($string, $index);
        return $substr;
    }

    /**
     * Creates performance-optimized function for de/encrypt(), storing it in $this->inline_crypt
     *
     * @see Crypt_Rijndael::encrypt()
     * @see Crypt_Rijndael::decrypt()
     * @access private
     */
    function inline_crypt_setup()
    {
        // Note: inline_crypt_setup() will be called only if $this->changed === true
        // So here we are'nt under the same heavy timing-stress as we are in _de/encryptBlock() or de/encrypt().
        // However...the here generated function- $code, stored as php callback in $this->inline_crypt, must work as fast as even possible.

        $lambda_functions =& Crypt_Rijndael::get_lambda_functions();
        $block_size = $this->block_size;
        $mode = $this->mode;

        // The first 5 generated $lambda_functions will use the key-words hardcoded for better performance. 
        // For memory reason we limit those ultra-optimized function code to 5.
        // After that, we use pure (extracted) integer vars for the key-words which is faster than accessing them via array.
        if (count($lambda_functions) < 5) {
            $w  = $this->w;
            $dw = $this->dw;
            $init_encryptBlock = '';
            $init_decryptBlock = '';
        } else {
            for ($i = 0, $cw = count($this->w); $i < $cw; ++$i) {
                $w[]  = '$w_'.$i;
                $dw[] = '$dw_'.$i;
            }
            $init_encryptBlock = 'extract($self->w,  EXTR_PREFIX_ALL, "w");';
            $init_decryptBlock = 'extract($self->dw, EXTR_PREFIX_ALL, "dw");';
        }

        $code_hash = md5("$mode, $block_size, " . implode(',', $w));

        if (!isset($lambda_functions[$code_hash])) {
            $Nr = $this->Nr;
            $Nb = $this->Nb;
            $c  = $this->c;

            // Generating encrypt code:
            $init_encryptBlock.= '
                $t0 = $self->t0;
                $t1 = $self->t1;
                $t2 = $self->t2;
                $t3 = $self->t3;
                $sbox = $self->sbox;';

            $s  = 'e';
            $e  = 's';
            $wc = $Nb - 1;

            // Preround: addRoundKey
            $_encryptBlock = '$in = unpack("N*", $in);'."\n";
            for ($i = 0; $i < $Nb; ++$i) {
                $_encryptBlock .= '$s'.$i.' = $in['.($i + 1).'] ^ '.$w[++$wc].";\n";
            }

            // Mainrounds: shiftRows + subWord + mixColumns + addRoundKey
            for ($round = 1; $round < $Nr; ++$round) {
                list($s, $e) = array($e, $s);
                for ($i = 0; $i < $Nb; ++$i) {
                    $_encryptBlock.=
                        '$'.$e.$i.' =
                        $t0[($'.$s.$i                  .' >> 24) & 0xff] ^
                        $t1[($'.$s.(($i + $c[1]) % $Nb).' >> 16) & 0xff] ^
                        $t2[($'.$s.(($i + $c[2]) % $Nb).' >>  8) & 0xff] ^
                        $t3[ $'.$s.(($i + $c[3]) % $Nb).'        & 0xff] ^
                        '.$w[++$wc].";\n";
                }
            }

            // Finalround: subWord + shiftRows + addRoundKey
            for ($i = 0; $i < $Nb; ++$i) {
                $_encryptBlock.=
                    '$'.$e.$i.' =
                     $sbox[ $'.$e.$i.'        & 0xff]        |
                    ($sbox[($'.$e.$i.' >>  8) & 0xff] <<  8) |
                    ($sbox[($'.$e.$i.' >> 16) & 0xff] << 16) |
                    ($sbox[($'.$e.$i.' >> 24) & 0xff] << 24);'."\n";
            }
            $_encryptBlock .= '$in = pack("N*"'."\n";
            for ($i = 0; $i < $Nb; ++$i) {
                $_encryptBlock.= ',
                    ($'.$e.$i                  .' & 0xFF000000) ^
                    ($'.$e.(($i + $c[1]) % $Nb).' & 0x00FF0000) ^
                    ($'.$e.(($i + $c[2]) % $Nb).' & 0x0000FF00) ^
                    ($'.$e.(($i + $c[3]) % $Nb).' & 0x000000FF) ^
                    '.$w[$i]."\n";
            }
            $_encryptBlock .= ');';

            // Generating decrypt code:
            $init_decryptBlock.= '
                $dt0 = $self->dt0;
                $dt1 = $self->dt1;
                $dt2 = $self->dt2;
                $dt3 = $self->dt3;
                $isbox = $self->isbox;';

            $s  = 'e';
            $e  = 's';
            $wc = $Nb - 1;

            // Preround: addRoundKey
            $_decryptBlock = '$in = unpack("N*", $in);'."\n";
            for ($i = 0; $i < $Nb; ++$i) {
                $_decryptBlock .= '$s'.$i.' = $in['.($i + 1).'] ^ '.$dw[++$wc].';'."\n";
            }

            // Mainrounds: shiftRows + subWord + mixColumns + addRoundKey
            for ($round = 1; $round < $Nr; ++$round) {
                list($s, $e) = array($e, $s);
                for ($i = 0; $i < $Nb; ++$i) {
                    $_decryptBlock.=
                        '$'.$e.$i.' =
                        $dt0[($'.$s.$i                        .' >> 24) & 0xff] ^
                        $dt1[($'.$s.(($Nb + $i - $c[1]) % $Nb).' >> 16) & 0xff] ^
                        $dt2[($'.$s.(($Nb + $i - $c[2]) % $Nb).' >>  8) & 0xff] ^
                        $dt3[ $'.$s.(($Nb + $i - $c[3]) % $Nb).'        & 0xff] ^
                        '.$dw[++$wc].";\n";
                }
            }

            // Finalround: subWord + shiftRows + addRoundKey
            for ($i = 0; $i < $Nb; ++$i) {
                $_decryptBlock.=
                    '$'.$e.$i.' =
                     $isbox[ $'.$e.$i.'        & 0xff]        |
                    ($isbox[($'.$e.$i.' >>  8) & 0xff] <<  8) |
                    ($isbox[($'.$e.$i.' >> 16) & 0xff] << 16) |
                    ($isbox[($'.$e.$i.' >> 24) & 0xff] << 24);'."\n";
            }
            $_decryptBlock .= '$in = pack("N*"'."\n";
            for ($i = 0; $i < $Nb; ++$i) {
                $_decryptBlock.= ',
                    ($'.$e.$i.                        ' & 0xFF000000) ^
                    ($'.$e.(($Nb + $i - $c[1]) % $Nb).' & 0x00FF0000) ^
                    ($'.$e.(($Nb + $i - $c[2]) % $Nb).' & 0x0000FF00) ^
                    ($'.$e.(($Nb + $i - $c[3]) % $Nb).' & 0x000000FF) ^
                    '.$dw[$i]."\n";
            }
            $_decryptBlock .= ');';

            // Generating mode of operation code:
            switch ($mode) {
                case CRYPT_RIJNDAEL_MODE_ECB:
                    $encrypt = $init_encryptBlock . '
                        $ciphertext = "";
                        $text = $self->_pad($text);
                        $plaintext_len = strlen($text);

                        for ($i = 0; $i < $plaintext_len; $i+= '.$block_size.') {
                            $in = substr($text, $i, '.$block_size.');
                            '.$_encryptBlock.'
                            $ciphertext.= $in;
                        }
                       
                        return $ciphertext;
                        ';

                    $decrypt = $init_decryptBlock . '
                        $plaintext = "";
                        $text = str_pad($text, strlen($text) + ('.$block_size.' - strlen($text) % '.$block_size.') % '.$block_size.', chr(0));
                        $ciphertext_len = strlen($text);

                        for ($i = 0; $i < $ciphertext_len; $i+= '.$block_size.') {
                            $in = substr($text, $i, '.$block_size.');
                            '.$_decryptBlock.'
                            $plaintext.= $in;
                        }

                        return $self->_unpad($plaintext);
                        ';
                    break;
                case CRYPT_RIJNDAEL_MODE_CBC:
                    $encrypt = $init_encryptBlock . '
                        $ciphertext = "";
                        $text = $self->_pad($text);
                        $plaintext_len = strlen($text);

                        $in = $self->encryptIV;

                        for ($i = 0; $i < $plaintext_len; $i+= '.$block_size.') {
                            $in = substr($text, $i, '.$block_size.') ^ $in;
                            '.$_encryptBlock.'
                            $ciphertext.= $in;
                        }

                        if ($self->continuousBuffer) {
                            $self->encryptIV = $in;
                        }

                        return $ciphertext;
                        ';

                    $decrypt = $init_decryptBlock . '
                        $plaintext = "";
                        $text = str_pad($text, strlen($text) + ('.$block_size.' - strlen($text) % '.$block_size.') % '.$block_size.', chr(0));
                        $ciphertext_len = strlen($text);

                        $iv = $self->decryptIV;

                        for ($i = 0; $i < $ciphertext_len; $i+= '.$block_size.') {
                            $in = $block = substr($text, $i, '.$block_size.');
                            '.$_decryptBlock.'
                            $plaintext.= $in ^ $iv;
                            $iv = $block;
                        }

                        if ($self->continuousBuffer) {
                            $self->decryptIV = $iv;
                        }

                        return $self->_unpad($plaintext);
                        ';
                    break;
                case CRYPT_RIJNDAEL_MODE_CTR:
                    $encrypt = $init_encryptBlock . '
                        $ciphertext = "";
                        $plaintext_len = strlen($text);
                        $xor = $self->encryptIV;
                        $buffer = &$self->enbuffer;

                        if (strlen($buffer["encrypted"])) {
                            for ($i = 0; $i < $plaintext_len; $i+= '.$block_size.') {
                                $block = substr($text, $i, '.$block_size.');
                                if (strlen($block) > strlen($buffer["encrypted"])) {
                                    $in = $self->_generate_xor('.$block_size.', $xor);
                                    '.$_encryptBlock.'
                                    $buffer["encrypted"].= $in;
                                }
                                $key = $self->_string_shift($buffer["encrypted"], '.$block_size.');
                                $ciphertext.= $block ^ $key;
                            }
                        } else {
                            for ($i = 0; $i < $plaintext_len; $i+= '.$block_size.') {
                                $block = substr($text, $i, '.$block_size.');
                                $in = $self->_generate_xor('.$block_size.', $xor);
                                '.$_encryptBlock.'
                                $key = $in;
                                $ciphertext.= $block ^ $key;
                            }
                        }
                        if ($self->continuousBuffer) {
                            $self->encryptIV = $xor;
                            if ($start = $plaintext_len % '.$block_size.') {
                                $buffer["encrypted"] = substr($key, $start) . $buffer["encrypted"];
                            }
                        }

                        return $ciphertext;
                    ';

                    $decrypt = $init_encryptBlock . '
                        $plaintext = "";
                        $ciphertext_len = strlen($text);
                        $xor = $self->decryptIV;
                        $buffer = &$self->debuffer;

                        if (strlen($buffer["ciphertext"])) {
                            for ($i = 0; $i < $ciphertext_len; $i+= '.$block_size.') {
                                $block = substr($text, $i, '.$block_size.');
                                if (strlen($block) > strlen($buffer["ciphertext"])) {
                                    $in = $self->_generate_xor('.$block_size.', $xor);
                                    '.$_encryptBlock.'
                                    $buffer["ciphertext"].= $in;
                                }
                                $key = $self->_string_shift($buffer["ciphertext"], '.$block_size.');
                                $plaintext.= $block ^ $key;
                            }
                        } else {
                            for ($i = 0; $i < $ciphertext_len; $i+= '.$block_size.') {
                                $block = substr($text, $i, '.$block_size.');
                                $in = $self->_generate_xor('.$block_size.', $xor);
                                '.$_encryptBlock.'
                                $key = $in;
                                $plaintext.= $block ^ $key;
                            }
                        }
                        if ($self->continuousBuffer) {
                            $self->decryptIV = $xor;
                            if ($start = $ciphertext_len % '.$block_size.') {
                                $buffer["ciphertext"] = substr($key, $start) . $buffer["ciphertext"];
                            }
                        }
                       
                        return $plaintext;
                        ';
                    break;
                case CRYPT_RIJNDAEL_MODE_CFB:
                    $encrypt = $init_encryptBlock . '
                        $ciphertext = "";
                        $buffer = &$self->enbuffer;

                        if ($self->continuousBuffer) {
                            $iv = &$self->encryptIV;
                            $pos = &$buffer["pos"];
                        } else {
                            $iv = $self->encryptIV;
                            $pos = 0;
                        }
                        $len = strlen($text);
                        $i = 0;
                        if ($pos) {
                            $orig_pos = $pos;
                            $max = '.$block_size.' - $pos;
                            if ($len >= $max) {
                                $i = $max;
                                $len-= $max;
                                $pos = 0;
                            } else {
                                $i = $len;
                                $pos+= $len;
                                $len = 0;
                            }
                            $ciphertext = substr($iv, $orig_pos) ^ $text;
                            $iv = substr_replace($iv, $ciphertext, $orig_pos, $i);
                        }
                        while ($len >= '.$block_size.') {
                            $in = $iv;
                            '.$_encryptBlock.';
                            $iv = $in ^ substr($text, $i, '.$block_size.');
                            $ciphertext.= $iv;
                            $len-= '.$block_size.';
                            $i+= '.$block_size.';
                        }
                        if ($len) {
                            $in = $iv;
                            '.$_encryptBlock.'
                            $iv = $in;
                            $block = $iv ^ substr($text, $i);
                            $iv = substr_replace($iv, $block, 0, $len);
                            $ciphertext.= $block;
                            $pos = $len;
                        }
                        return $ciphertext;
                    ';

                    $decrypt = $init_encryptBlock . '
                        $plaintext = "";
                        $buffer = &$self->debuffer;

                        if ($self->continuousBuffer) {
                            $iv = &$self->decryptIV;
                            $pos = &$buffer["pos"];
                        } else {
                            $iv = $self->decryptIV;
                            $pos = 0;
                        }
                        $len = strlen($text);
                        $i = 0;
                        if ($pos) {
                            $orig_pos = $pos;
                            $max = '.$block_size.' - $pos;
                            if ($len >= $max) {
                                $i = $max;
                                $len-= $max;
                                $pos = 0;
                            } else {
                                $i = $len;
                                $pos+= $len;
                                $len = 0;
                            }
                            $plaintext = substr($iv, $orig_pos) ^ $text;
                            $iv = substr_replace($iv, substr($text, 0, $i), $orig_pos, $i);
                        }
                        while ($len >= '.$block_size.') {
                            $in = $iv;
                            '.$_encryptBlock.'
                            $iv = $in;
                            $cb = substr($text, $i, '.$block_size.');
                            $plaintext.= $iv ^ $cb;
                            $iv = $cb;
                            $len-= '.$block_size.';
                            $i+= '.$block_size.';
                        }
                        if ($len) {
                            $in = $iv;
                            '.$_encryptBlock.'
                            $iv = $in;
                            $plaintext.= $iv ^ substr($text, $i);
                            $iv = substr_replace($iv, substr($text, $i), 0, $len);
                            $pos = $len;
                        }

                        return $plaintext;
                        ';
                    break;
                case CRYPT_RIJNDAEL_MODE_OFB:
                    $encrypt = $init_encryptBlock . '
                        $ciphertext = "";
                        $plaintext_len = strlen($text);
                        $xor = $self->encryptIV;
                        $buffer = &$self->enbuffer;

                        if (strlen($buffer["xor"])) {
                            for ($i = 0; $i < $plaintext_len; $i+= '.$block_size.') {
                                $in = $xor;
                                '.$_encryptBlock.'
                                $xor = $in;
                                $buffer["xor"].= $xor;
                                $key = $self->_string_shift($buffer["xor"], '.$block_size.');
                                $ciphertext.= substr($text, $i, '.$block_size.') ^ $key;
                            }
                        } else {
                            for ($i = 0; $i < $plaintext_len; $i+= '.$block_size.') {
                                $in = $xor;
                                '.$_encryptBlock.'
                                $xor = $in;
                                $ciphertext.= substr($text, $i, '.$block_size.') ^ $xor;
                            }
                            $key = $xor;
                        }
                        if ($self->continuousBuffer) {
                            $self->encryptIV = $xor;
                            if ($start = $plaintext_len % '.$block_size.') {
                                 $buffer["xor"] = substr($key, $start) . $buffer["xor"];
                            }
                        }
                        return $ciphertext;
                        ';

                    $decrypt = $init_encryptBlock . '
                        $plaintext = "";
                        $ciphertext_len = strlen($text);
                        $xor = $self->decryptIV;
                        $buffer = &$self->debuffer;

                        if (strlen($buffer["xor"])) {
                            for ($i = 0; $i < $ciphertext_len; $i+= '.$block_size.') {
                                $in = $xor;
                                '.$_encryptBlock.'
                                $xor = $in;
                                $buffer["xor"].= $xor;
                                $key = $self->_string_shift($buffer["xor"], '.$block_size.');
                                $plaintext.= substr($text, $i, '.$block_size.') ^ $key;
                            }
                        } else {
                            for ($i = 0; $i < $ciphertext_len; $i+= '.$block_size.') {
                                $in = $xor;
                                '.$_encryptBlock.'
                                $xor = $in;
                                $plaintext.= substr($text, $i, '.$block_size.') ^ $xor;
                            }
                            $key = $xor;
                        }
                        if ($self->continuousBuffer) {
                            $self->decryptIV = $xor;
                            if ($start = $ciphertext_len % '.$block_size.') {
                                 $buffer["xor"] = substr($key, $start) . $buffer["xor"];
                            }
                        }
                        return $plaintext;
                        ';
                    break;
            }
            $lambda_functions[$code_hash] = create_function('$action, &$self, $text', 'if ($action == "encrypt") { '.$encrypt.' } else { '.$decrypt.' }');
        }
        $this->inline_crypt = $lambda_functions[$code_hash];
    }

    /**
     * Holds the lambda_functions table (classwide)
     *
     * @see Crypt_Rijndael::inline_crypt_setup()
     * @return Array
     * @access private
     */
    function &get_lambda_functions()
    {
        static $functions = array();
        return $functions;
    }
}

// vim: ts=4:sw=4:et:
// vim6: fdl=1: